Welcome to Changzhou Lingyu Drying Engineering Co., Ltd official website!
Service Hotline
0086-519-88902881
Current location:Home > Products > Spray drying series
Products

Horizontal Spray Drying Technology

Overview:Product Descriptions◆ Horizontal spray dryer is the XIANDAO proprietary technology. Its main feature is: drying chamber is placed horizontally and it is equipped with a set of advanced heat recovery system. This design can not only save a lot of spac…
  • Horizontal Spray Drying Technology
Details Photo Gallery
Product Descriptions
◆ Horizontal spray dryer is the XIANDAO proprietary technology. Its main feature is: drying chamber is placed horizontally and it is equipped with a set of advanced heat recovery system. This design can not only save a lot of space, reduce production costs, but also reduce the investment cost, in addition, the equipment is easy to be cleaned and maintained routinely.
◆ The feed section is pumped to the nozzle atomizers by means of a high-pressure feed pump, and the amount of feed is automatically controlled by the plant control system.
◆ The atomization of the feed section takes place co-current to the drying air in a reliable nozzle atomizer.
◆ The drying air is filtered and is afterwards heated in a steam air heater then the hot air is transferred to an effective air distributor placed on head of the drying chamber.
◆ The drying chamber is placed horizontally. The powder after dried fall to the floor, where there is a clean sweeper with conveyor drive. The powder is sweeped continuously to the screw of the tail of the drying chamber. And then the product gets out from the screw.

◆ The chamber will be constructed according to the co-current flow principle, i.e. the hot air will enter the chamber cocurrent with the atomized feed still having a high content of water. Consequently, an immediate drop in temperature will take place due to evaporation, thus preventing overheating of the micro pearls.
◆ Most powder product discharged through a rotary valve from the tail of the drying chamber. The fines from chamber will be led to a bag filter for separation, and the clean air is let to the heat recovery system.
◆ The dried powder is discharged into a vibrating powder sifter for final treatment i.e., where oversize particles are screened off.
◆ A XIANDAO heat recovery system can be retrofitted to your spray-drying plant to take advantage of the heat already flowing through it, enabling you to cut heating costs by as much as 20%.
◆ The plant will be delivered with necessary instruments for control and supervision of the entire process.

Horizontal Spray Drying Technology
    There is no relevant video.
There are no relevant cases.
No relevant article
Related products

Copyright 2020 Changzhou Lingyu Drying Engineering Co., Ltd All rights reserved Support: Eastnet | Manage
Top